Specifications; Configuration And Completeness Of Delivery - Tiso T1.1.BYO Series Operation Manual

End of the Table 2
Operation conditions
Installation site
Running position
1.1.5 Reliability indices:
– mean time to repair (without delivery time of spare parts, tools and accessories) – at most
6 hours;
– mean time to failure – at least 1 500 000 accesses;
– mean service life between overhauls – at least 10 years.

1.2 Specifications

Principal parameters of the turnstile are specified in the Table 3.
Table 3
Parameter description
Traffic flow capacity in free access mode is at least
Max. passage width
Supply voltage:
– AC power supply (primary)
– DC power supply (secondary)
Max. power consumption
Index of protection according to GOST 14254-96

1.3 Configuration and Completeness of Delivery

1.3.1 Turnstile design
1.3.1.1 Design of the Single Full-Height Turnstile includes the following principal devices and
components:
–
prefabricated structure including:
1) passage wall;
2) enclosure wall;
–
rotor;
–
container with control mechanism;
–
LED display;
–
electrical equipment;
–
control panel.
1.3.1.2 The turnstile modifications depend on the shape of barrier rods: turnstile modification with
straight barrier rods (reference designation T1.1.BYO.ХP).
1.3.1.3 The turnstile modifications are manufactured from the following materials: polished or
brushed stainless steel (reference designation T1.1.BYO.ХP).
Modification, overall and installation dimensions of the turnstile are shown in the Appendix A.
1.3.2 Completeness of Delivery
The turnstile is supplied ready-to-install or by components.
Completeness of delivery is specified in the Table 4.
For climatic
version
In enclosed spaces in the absence of
direct impact of precipitations and solar
radiation
N4
Vertical, deviation from vertical position
no more than 1º to any side is tolerated
6
Parameter value
Unit measure Parameter value
man/min.
mm
V
Hz
В
V·А
–
АUIА.427.00.00.00-02 OM
20
649
100 240
~ 50/60
12
50
IP54