Operating position
1.1.5 Reliability indices:
mean time to repair (without delivery time of spare parts, tools and accessories) – at most
6 hours;
mean time to failure – at least 5 000 000 accesses;
mean service life between overhauls – at least 10 years.
1.2 Specifications
The key parameters of the turnstile are specified in Table 3.
Minimum traffic flow capacity in free access mode
Opening time
Maximum access way width
- narrow leaf
- wide leaf
- telescopic leaf
Maximum access way width
– AC power supply (primary)
– DC power supply (secondary)
Maximum power consumption
Index of protection according to EN 60529
1.3 Configuration and Scope of Delivery
1.3.1 The swing gate type waist-high turnstile design includes the following key devices
and components:
– housing;
– leaf;
– actuator;
– control unit;
The turnstile also includes control panel.
Design, overall and installation dimensions of the turnstile are shown in Annex A.
The turnstile modification is based on the leaf material
1) stainless steel leaf (reference designation T3.КCН.XD);
2) glass leaf (reference designation T3.КСС.XD).
The turnstile modifications are manufactured from:
– brushed stainless steel (reference designation T3.КXХ.SD).
– polished stainless steel (reference designation T3.КXХ.РD).
– carbon steel subject to painting (reference designation T3.КXХ.КD);
precipitations and solar radiation
Vertical, deviation from vertical position no more than 1º to any
side is tolerated
Parameter description
Operation Manual 7
Table 3
Parameter
60 man/min.
2-5 s
650 mm
900 mm
700-1050 mm
100 240V
~ 50/60Hz
12W
55W
IP41