Table of Contents
Advertisement
1. DESCRIPTION AND OPERATION
1.1. General Information and Purpose
The turnstile is designed for pedestrian movement control at access points of industrial enterprises, banks,
stadiums, administrative facilities etc. and outdoor due to command signals of access control system (from keypad,
proximity card readers) or manually (from manual control panel). The servo-operated gate basic modification implies for
access of perambulators or for wheelchairs access.
The turnstile traffic flow capacity without personal identification is at least 20 persons per minute.
1.2. Specifications
Parameter name
Throughput in a single pass mode, not less than
Passage width throught gate, mm
Dimensions, НхLxW
Max. weight
Power supply voltage:
Consumed power, no more than
Mechanism
Degree of protection according to EN 60529
- for outdoor turnstile
- for an internal turnstile
Emergency mode in case of power failure
Housing designation and modification:
- modification
- type of assembly
Gate purpose
Reliability performances
- average recovery time of the operable condition (omitting the spare parts'
delivery time)
- mean time between failures
- average life of the turnstile till overhaul –
Materials:
The turnstile modifications are manufactured from the following materials
1.3. The parameters defining operation conditions according to GOST 15150-69 are specified in Table 2.
Operational conditions
1
Ambient temperature
Relative humidity
Permissible ambient air pressure
Mechanical design group
Altitude above sea level
Environment
Place of installation
Operational position
The parameters for climate version
NF4 (for indoor application)
2
from +1 to +40 °С
80 % if +25 ºС (non-condensing)
from 84 to 106,7 kPa
L3
up to 2000 m
Explosion-proof does not contain
conductive dust, corrosive gases, and
vapors in concentrations that destroy
insulation and metals that disrupt the
normal operation of the equipment
installed in the turnstile
in closed rooms in the absence of
direct
impact
of
precipitation and solar radiation
vertical, not more than 1 ° of
deviation from a vertical position in
either direction is allowed
20 person/min.
900 mm
2300х1168х1216 mm
150 kg
100 240 V ~ 50/60 Hz, 12 V
55 W
Servo-drive
IP65
IP41
Entry: fail-safe (NO)
Exit: fail-secure (NC)
standard / mirrored
fully welded / disassembled
for wheelchairs
no more than 6 hours
at least 5 000 000 passes
not less than 10 years.
- carbon steel subject to painting
- polished or brushed stainless steel
- carbon steel subject to galvanization
N1( for outdoor application)
5% to 95%, non-condensing
Explosion-proof
conductive dust, corrosive gases, and
vapors in concentrations that destroy
insulation and metals that disrupt the
normal operation of the equipment
installed in the turnstile
Outdoors and non-heated rooms
atmospheric
vertical, not more than 1 ° of deviation
from a vertical position in either direction
is allowed
Operation Manual 4
Table 1 - Specifications
Parameter value
3
From -40 to +60 °С
from 84 to 106,7 kPa
L3
up to 2000 m
does
not
contain
Table 2
Advertisement
Table of Contents
