Southbend EH-10CCH Installation & Operation Manual page 32

Operation
CONFIGURATION
Service Only USB Access
The access to the USB port to import/export recipes, update software versions, and add Icons is located on the back of
the control panel. Remove the two screws securing the control panel and pull out. Underneath the digital display you will
find the USB port. If importing files, make sure that the unit is off before inserting USB drive and then turn on. There will be
a slight delay compared to normal operation and the file(s) will automatically load. Created Icons must be bitmap file type.
Recipes will need to be created on the touchscreen prior to export.
Settings
1. Back Button – Returns to previous screen.
2. Setup – Passcode protected parameter configurator. Manager passcode allows
owners to change limited unit variables.
3. Service – Passcode protected unit health and I/O test panel with current input
readings.
As in normal operation, blower speed must be activated prior to turning on
heat. The door may be open or closed to function.
Number Pad
• Entering a new value will start from the right and move left.
• Continuing to enter new numbers will shift the furthest left characters out.
• Press the bottom right arrow button to enter value
• Clear all values back to 0000 with bottom left clear button
32
PAGE OF 76
Marathoner Gold Half-Size Electric Convection Ovens
NOTICE
INSTALLATION & OPERATION MANUAL 1184093 REV 4 (01/23)