HIKVISION AX PRO User Manual page 34

Enable Alarm
Tap to select Audible Panic Alarm or Silent Panic Alarm.
View Faults
Tap to view faults.
Area Management
Tap + to add an area.
Tap Area to enter the area management page. Refers to Set Arming/Disarming Schedule for
details.
Arm/Disarm the Area
Arm or disarm the area manually as you desired.
On the device list page, tap the AX PRO and then log in to the device (if required) to enter the Area
page.
Operations for a Single Area
● Away Arming: Tap
leave, turn on the Away mode to arm all zones in the area after the defined dwell time.
● Stay Arming: Tap
area, turn on the Stay mode to arm all the perimeter burglary detection set in all the zones of all
areas.
Operations for Multiple Areas
● Select Areas: Tap
operations will take effect for all areas.
● Away Arming: Tap
leave, turn on the Away mode to arm all zones in all areas after the defined dwell time.
● Stay Arming: Tap
turn on the Stay mode to arm all the perimeter burglary detection (such as perimeter detector,
magnetic contacts, curtain detector in the balcony) set in all the zones of all areas. At the
meantime, the detectors inside the detection area are bypassed (such as PIR detectors). People
Figure 5-2.
to away arm a single area. When all the people in the detection area
to stay arm a single area. When all the people stays inside the detection
Figure 5-3. Multiple Area Key
to select areas you want to operate. If you do not select areas, following
to away arm selected areas. When all the people in the detection area
to stay arm all areas. When the people stays inside the detection area,
Single Area
33