HIKVISION AX PRO User Manual page 106

2. Configure SMTP parameters:
(1) Click Configuration → Alarm Communication → Notification by Email.
(2) Slide to enable the function and set corresponding parameters. For details, see Notification
by Email. Click Save.
3. Configure FTP parameters:
(1) Click Configuration → Alarm Communication → FTP to enter the page.
(2) Slide to enable FTP and set corresponding parameters. For details, see FTP. Click Save.
4. Upload Videos
In this condition, when the PIRCAM is set to catch more than two pictures, videos will be
uploaded.
(1) Click Configuration → Alarm Communication → Alarm Receiving Center to enter the page.
(2) Slide the slider to enable the selected alarm receiver center.
(3) Select the Protocol Type as SIA-DCS.
(4) Click Save.
(5) Configure SMTP or FTP parameters as same as Upload Photos.
Event Notification
When an alarm is triggered, if you want to send the alarm notification to the client, alarm center,
cloud or mobile phone, you can set the notification push parameters.
Alarm Receiving Center
Steps
1. Click Configuration → Alarm Communication → Event Notification → Alarm Receiving Center.
Figure 5-31. Upload Video and Picture
105