HIKVISION AX PRO User Manual page 105

3. Select the Protocol Type as ADM-CID, ISUP, SIA-DCS, *SIA-DCS, *ADM-CID, CSV-IP, FSK Module
or RDC Module to set uploading mode.
Note
Standard DC-09 Protocol
ADM-CID: The data presenting method of DC-09 is CID, which is not encrypted and only for
uploading alarm report.
*ADM-CID: The data presenting method of DC-09 is CID, which is encrypted and only for
uploading alarm report.
SIA-DCS: The data presenting method of DC-09 is DCS (also called SIA protocol), which is not
encrypted and only for uploading alarm report.
*SIA-DCS: The data presenting method of DC-09 is DCS (also called SIA protocol), which is
encrypted and only for uploading alarm report.
– ADM-CID or SIA-DCS: You should select the Address Type as IP or Domain name, and set the
server address, port number, account code, impulse counting time, attempts, polling rate.
– ISUP, CSV-IP, FSK and RDC: You do not need to set the protocol parameters.
– *SIA-DCS or *ADM-CID You should select the Address Type as IP or Domain name, and set
the server address, port number, account code, impulse counting time, attempts, encryption
arithmetic, password length and secret key.
Periodic Test
After enabling, you can set the time interval, setting how often to send a test event to the
ARC to ensure the connection.
4. Click Save.
Use PIRCAM to Upload Pictures or Videos
You can enable the PIRCAM function to upload pictures or videos.
1. Upload Pictures
You can choose to upload 1 to 20 pictures.
(1) Click Configuration → Alarm Communication → Alarm Receiving Center to enter the page.
(2) Slide the slider to enable the selected alarm receiving center.
(3) Select the Protocol Type as SIA-DCS.
(4) Select the Companies as French Alarm Receiving Company.
(5) Select to upload videos or pictures
(6) Click Save.
104