HIKVISION AX PRO User Manual page 22

Figure 3-15. Reload
If you make sure that the home Wi-Fi password is correct and quality is good, tap Refresh
Network, the control panel will enter a new countdown. You can wait for the connection.
If you want to change the home Wi-Fi, you should change the home Wi-Fi connected to the mobile
phone first, then press the RESET button on the back of the control panel (marked in the figure
below). After hearing the voice of "Enter hotspot mode", tap Reload. The interface will jump back
step 9, you can configure the network again.
Figure 3-16. Reset Button
Note
Once the device connected to the network, the LED indicator turns green.
21