HIKVISION AX PRO User Manual page 98

-After Disarm: Motion detectors automatically restores after disarming and reports to Cloud
(for APP) and ARC.
Energy Save Mode
While enabled, the main power supply is off, Wi-Fi enters low power consumption, 4G closes,
tag reading fails. LED is off, and voice prompt is off.
Panel Lockup Button
All functions of AX PRO will be frozen after it is enabled. This function can only be enabled by
users with installer permission.
Click Save.
Panel Fault Check
The fault check here is only for the control panel in the normal status.
The system determines whether to check the faults listed on the page. The system will only check
the fault that is selected.
Click Configuration → System → Control Panel Option → Panel Fault Check to enter the page.
Report Delay
If the fault returns to normal within the delay duration, no fault will be reported.
Battery Lost
If the option is enabled, when battery is disconnected, the device will upload events.
Low Battery
If the option is enabled, when battery is in low battery status, the device will upload events.
LAN Lost
If the option is enabled, when the wired network is disconnected or with other faults, the
alarm will be triggered.
Wi-Fi Lost
If the option is enabled, when the Wi-Fi is disconnected or with other faults, the alarm will be
triggered.
Cellular Lost
If the option is enabled, when the cellular data network is disconnected or with other faults,
Figure 5-25. Panel Fault Check
97