Close Valve; Open Valve; Position Control - VAT 615 Series Installation, Operating, & Maintenance Instructions
Butterfly control & isolation valve
Hide thumbs
Also See for 615 Series:
Table of Contents
Advertisement
3.7
Close valve
('Control View', 'Control Performance Analyzer' or
Push CLOSE button
3.8
Open valve
('Control View', 'Control Performance Analyzer' or
Push OPEN button
3.9
Position control
The valve position is directly controlled according to the position setpoint.
('Control View', 'Control Performance Analyzer' or
Select or enter position setpoint
VAT Vakuumventile AG, CH-9469 Haag, Switzerland
Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com
Installation, Operating & Maintenance Instructions
Series 615 DN 40-50 (I.D. 1.5" - 2"), DeviceNet
Local
operation:
'Service Box 2')
Local
operation:
'Service Box 2')
Local
operation:
'Service Box 2')
Remote
(Refer to chapter «Explicit messaging control
commands» for details)
1.
Send EXECUTING
(if not yet selected)
2.
Send SETPOINT TYPE
= position control
3.
Send CONTROL MODE for position
= close valve
Remote
(Refer to chapter «Explicit messaging control
commands» for details)
1.
Send EXECUTING
(if not yet selected)
2.
Send SETPOINT TYPE
= position control
3.
Send CONTROL MODE for position
= open valve
Remote
(Refer to chapter «Explicit messaging control
commands» for details)
1.
Send EXECUTING
(if not yet selected)
2.
Send SETPOINT TYPE
= position control
3.
Send CONTROL MODE for position
= control mode
4.
Send POSITION SETPOINT
operation:
operation:
operation:
289859EA
34/83
2011-11-24
Advertisement
Table of Contents
