Reed Valve And Intake Boot; Gearbox Output Sprocket - SHERCO 125 Workshop Manual

ENGINE ASSEMBLING
❱❘ Reed valve and intake boot
Place a new reed valve gasket.
•
Fit the reed valve.
•
Place a new intake boot gasket.
•
Fit the intake boot and tighten its four M5
•
screws at a 6Nm torque.
❱❘ Gearbox output sprocket
Fit the engine-side snap ring.
•
Place the sprocket, the number of teeth
•
faced outwards .
Fit the outside snap ring.
•
48
ST SERIES