Carburettor And Reed Block - SHERCO ST Series Workshop Manual

- Remove the rubber cap and cover from
the throttle grip and release the cable.
- Open the cover and remove the air
fi lter. Loosen the 2 screws fastening
the fi lter box and the 3 screws from
the rear mudguard.
- Remove the CDI and the clamps
securing the carburettor to the inlet
nozzles and fi lter.
- Close the fuel petcock valve. Remove
the carburettor towards one side and
dismantle the draining tube.
144

CARBURETTOR AND REED BLOCK

ST SERIES