ENGINE ASSEMBLING
•
Insert the gear selector shaft through the
shifting drum.
•
Pinch the pawls, so that the gearbox is
at neutral, as shown in the picture
•
Install the selector shaft's snap ring
•
Place the forks in this way :
•
Place the two gear shafts, taking care on
installing the forks in their grooves.
•
Install the shifting locator, screw in the
CHC screw without tightening it.
•
Place the shifting locator locking tool
Part number 10988 in order to hold it
open.
•
Put back the gearbox-shifting assembly
in the crankcase.
38
1
.
ST SERIES