CHASSIS
•
Do a back and forth movement as shown in
the picture to prime the hydraulic system,
until you feel resistance.
•
Compress the fork tube and damping rod
to the maximum.
•
Measure oil level from the top of the tube,
then fill until you reach the desired height.
Oil level : 85mm
•
Undo totally the damping rod nut and
place the cap
•
Tighten the cap
12Nm torque.
•
Tighten the cap to the tube at a 12Nm
torque.
1.4.2 Left side oil change
•
Using a 17mm wrench, undo the cap
•
Remove conical spacer
•
Remove spacer
washer placed between it and the spring.
10
4
5
with the nut
to a
6
7
.
8
, as well as the
ST SERIES
4
5
6
7
8