EGINE PARTS CHECK
❱❘ Clutch
1
•
Clutch pusher
2
Pushrod
check wear, minimum length : 128.8 mm.
•
3
Pads
check condition, looking for abnormal marks.
•
4
Basket
check for grooves, on the fingers.
•
5
Hub
check for marks on the discs seating surface.
•
❱❘ Discs check
•
On diaphragm clutch, discs thickness control is
done with the whole batch (friction plates and
smooth plates)
Minimum thickness : 9,92 mm
During discs disassembly, hold them together with a tie so as to keep their position and assembly
order. Worn discs that are not reassembled in the same way can cause vibrations in the clutch.
35
Check wear.
ST SERIES
CAUTION