Replacement; Procedure C1: Replacement Of Filter - Sames Inocart VT Instruction Manual

8.4. Replacement

The following maintenance operations are to be carried out in the workshop.

8.4.1. Procedure C1: Replacement of filter

• Step 1: Remove the rear panel from the cart.
• Step 2: Disconnect the air supplies.
• Step 3: Unscrew the brass plug (A) and remove
the filter assembly.
• Step 4: To reassemble, proceed in reverse order:
Replace the complete filter assembly.
Attach the filter to the arm support with the brass
plug, the washer is placed inside and the plug is placed
outside.
Reconnect the air supplies.
Replace the rear panel.
Member of Exel group 27
A
DRT7159
B - 2023/03