Inocart Vt Dual Version - Sames Inocart VT Instruction Manual

6.1.1. Inocart VT dual version

• Step 1: Place the wall bracket on the cabin wall.
• Step 2: Install the dual plunger wiring set.
• Step 3: Install the 2nd Inobox control module and
connect (see DRT7145) the 2nd wiring set.
• Step 4: Connect the Inogun M 6 m to the Inobox.
• Step 5: Install the support of the 2 tubes on the
support arm.
• Step 6: Install the 2 tubes equipped with the 2 CS130
pumps, connect the 2 tubes to the second powder
pump, blue to blue, red to red.
Connect the fluidizing hose to the tube.
• Step 7: Connect the powder hose of the 2nd gun to
the 2nd pump CS 130 and connect the electrode
blowing hose on the Inobox control module side and
on the gun side.
• Step 8: Connect the power supply cable of the
second Inobox.
Member of Exel group 19
DRT7159
B - 2023/03