Inocart H Dual Version - Sames Inocart VT Instruction Manual

6.2.1. Inocart H dual version

• Step 1: Place the wall bracket on the cabin wall.
• Step 2: Install the dual plunger wiring set.
• Step 3: Install the 2nd Inobox control module and connect
• Step 4: Connect the Inogun M 6 m to the Inobox.
• Step 5: Install the delivered "Y" on the fluidizing connection at the bottom of the hopper to connect the 2
fluidizing hoses. The fluidization can be controlled by one or the other Inobox.
• Step 6: Remove the cap of the hopper and insert the 2nd plunger tube equipped with its powder pump,
connect the 2 hoses on the powder pump blue on blue, red on red..
• Step 7: Connect the powder hose of the 2nd gun to the 2nd pump CS 130 and connect the electrode blowing
hose on the stainless steel module Inobox side and on the gun side.
• Step 8: Connect the power supply of the second Inobox control module.
Member of Exel group
(see DRT7145) the wiring set.
21
DRT7159
B - 2023/03