Description Of The Hardware - KEB COMBICOM Instruction Manual

Powerlink Operator
2.

Description of the Hardware

PowerLink-Mailbox active
Powerlink Command-Layer active: Flashes, as long as the parameter channel communication is active.
EPL_Link0: Flashes, if a link is recognized at Powerlink-Port0. Flashes in case of activity on this port.
EPL_Link1: Flashes, if a Link is recognized at Powerlink-Port1. Flashes in case of activity on this port.
FU-Error: Red LED as copy of the FI error LED:
LED example
constantly off
blinking
constantly on
EPL_ERROR: Red LED in accordance with the specification "ERROR Led` in the Powerlink specification ([1]):
LED example
constantly off
constantly on
EPL_Link0
EPL_Link1
ENTER
X6B
Diagnose
Node-Switch
x16 x1
START
FUNC
STOP
PowerLink
Uext
Port1
Port0
(24V)
X6C X6D
+
Description
No voltage supply at FI control circuit
FI control in error status
No error
Description
No error
Active error status
FU-Error
EPL_Error
EPL_Status
GB - 7