Integration Of The Keb-F5 Powerlink Drive In The Automation Studio Of The B&R Company; Integration As Generic Powerlink Station - KEB COMBICOM Instruction Manual

Powerlink Operator
5.4 Integration of the KEB-F5 Powerlink drive in the Automation Studio of the B&R
company

5.4.1 Integration as Generic Powerlink Station

The following pictures shall help to integrate a KEB Powerlink slave into a SPS project of the B&R company. The
unit must which contains the Powerlink interface must be selected in the left part of the window (hardware tree).
Go onto Powerlink side in the right window. After this a right-clicks on the interface module must be done and
afterward select "INSERT... ':
Select ‚Generic Powerlink Station' in group ‚Powerlink Devices' in the following window:
GB - 19