Push Retries - Banner DXMR110-8K Instruction Manual

Io-link master
Table of Contents

Advertisement

C
I
ONFIGURATION
NSTRUCTIONS
Figure 6: Import Add-On Instructions

5.5. Push Retries

Ethernet—The DXMR110-8K can be configured to send register data packets to a webserver. When the Ethernet communications path is not
operating, the DXMR110-8K retries the send procedure. With an Ethernet-based network connection, the DXMR110-8K retries a message five
times. The five retry attempts immediately follow each other. After all attempts are exhausted, the register data packet is lost. At the next sched-
uled time, the DXMR110-8K attempts to send only the new data. Any past data that the DXMR90 was unable to push is lost and cannot be recov-
ered. Using SSL on Ethernet will have no retries.
Event/Action—Event-based pushes caused by Action rules sent using email follow the same process when failures occur, based on the network
connection.
Email—There are no retries for emails that fail to be sent from the DXMR110-8K.
© Banner Engineering Corp. www.bannerengineering.com
22

Advertisement

Table of Contents
loading

Table of Contents