Configuring The Dxmr110-8K Controller - Banner DXMR110-8K Instruction Manual

Q S G
UICK TART UIDE
DXM Configuration Software
Local Registers
Register Mapping
Action Rules
Scheduler
Script Basic
System Register
Settings
View Utility
Ethernet
XML Config File
Figure 2: Overview of the configuration software features
The configuration software creates an XML file that is transferred to the DXM using an Ethernet connection. The DXM can also receive the XML
configuration file from a Web server using an Ethernet connection. This configuration file governs all aspects of the DXM operation. The DXM
Configuration Software allows the user to define parameters for the DXMR110-8K, then saves the configuration in an XML file on the PC.
After the configuration file is saved, upload the XML configuration file to the DXMR110-8K for operation.
: The DXMR110-8K IO-Link Master comes preloaded with a default configuration XML file. You can download the default XML on the
IMPORTANT
product page for the DXMR110-8K.
This quick start guide outlines the basic operations to set up a DXMR110-8K using the configuration software. For a more comprehensive expla-
nation of features, refer to the DXM Configuration Software Instruction Manual (p/n 209933).

3.2.2. Configuring the DXMR110-8K Controller

This section will walk you through the method of setting up the DXM Configuration Software and communicating with a connected DXM device.
Version 4 of the DXM Configuration Software supports multiple DXM device models, each of which incorporates different features.
As soon as a DXM model is connected to your computer, the software automatically detects the correct model and loads the appropriate screens.
You may also manually select which model of DXM you are configuring if you intend to create a configuration file without connecting a device.
This ensures that the interface and the configuration file use the correct features.
Not all screens are available for all models. To change to another model of DXM, go to the Select Mode screen and use the drop-down list to
select another model. If the active configuration is incompatible with the selected model, you will be prompted to either proceed and wipe out the
active configuration or cancel the model change and preserve the configuration.
© Banner Engineering Corp. www.bannerengineering.com 8