Table of Contents
Advertisement
C
C
ONTROLLER
ONNECTIONS FOR THE
Table 3: Reset codes
Reset Code
0
1
2
3
4
5
6
7
4.4. Connecting to Remote IO-Link Devices
Use the DXMR110-8K's IO-link ports for connecting IO-Link devices and digital sensors, lights, and actuators. All ports use a 4-pin M12 female
connector to connect to remote devices. No additional wiring is required if the sensors use compatible wiring.
Table 4: Ports 1-4 female connector
Port 1–4 5-pin M12 Connector (female)
2
1
3
4
5
The basic communications parameters for the IO-Link ports are set in the DXM Configuration Software and are saved in the XML configuration
file. Each port can have unique settings.
15
DXMR110-8K
Undefined
Unknown
General
Brownout
Watchdog
User
Software
Return from backup mode
Pin
Wire Color
1
Brown (bn)
2
White (wh)
3
Blue (bu)
4
Black (bk)
5
Gray (gy)
Figure 2: RTU Configuration screen for ports 1-4
© Banner Engineering Corp. www.bannerengineering.com
Definition
Description
18 V DC to 30 V DC
I/Q (digital in-out)
DC common (GND)
C/Q (communications/digital in-out)
Not used/reserved
Advertisement
Table of Contents
