Changing The Name Of A Module (Optional) - Data Translation DT9812 Series User Manual

Changing the Name of a Module (Optional)

To change the name of a module, configure the device driver as follows:
1. From the Windows Start menu, select Settings|Control Panel.
2. From the Control Panel, double-click Open Layers Control Panel.
The Data Acquisition Control Panel dialog box appears.
3. Click the DT9812, DT9813, or DT9814 Series module that you want to rename, and then
click Edit Name.
4. Enter a new name for the module, and then click OK. The name is used to identify the
module in all subsequent applications.
5. When you are finished configuring the module, click Close.
6. Repeat steps 3 to 5 for the other modules that you want to configure.
7. Close the Data Acquisition Control Panel dialog box.
Continue with the instructions on wiring in
Setting Up and Installing the Module
Chapter 3 starting on page 27.
25