Kontron KTA75/Flex User Manual page 60

KTD-N0876-0
8.6 SATA0, SATA1, SATA2, SATA3, SATA4 & SATA5 (J12,
J13, J9, J11, J10 & J39)
The six SATA ports comply with SATA 3.0 and supports IDE emulation
mode, AHCI (Advanced Host Controller Interface) 1.3 mode and RAID mode
(RAID 0, RAID 1 and RAID10) across all 6 ports.
The SATA 3.0 supports transfer rates up to 6 Gbit/s, but also SATA 1.0
and SATA 2.0 transfer rates are supported, 1.5 Gbit/s and 3.0 Gbit/s
respectively.
®
The S-ATA interface is available through standard L-type connector (7
pins).
Header
1
Available cable kit:
Page 57
Pin Signal
1 GND
2 TX+
3 TX-
4 GND
5 RX-
6 RX+
7 GND
PN 821035 Cable SATA 500mm
KTA75/Flex Users Guide
KTA75/Flex Users Guide
Connector Signal Definition
Description
Ground
Transmit
(positive)
Transmit
(negative)
Ground
Receive
(negative)
Receive
(positive)
Ground
Type
PWR
DSO
DSO
PWR
DSI
DSI
PWR