Kontron KTA75/Flex User Manual page 13

KTD-N0876-0
PCIe 1x PCI Express x16 Slot
1x PCI Express x4 Slot (in mechanically x16 slot)
1x mPCIe Slot J38
1x mPCIe/mSATA J43 (mechanically sharing between mSATA and
mPCIe) The mSATA interface will be selected when a mSATA
card are inserted into the mPCIe socket (J43)
DisplayPo 3x DisplayPort connector ( in REAR-IO area)
rt DP1 J43
DP2 J3
DP0 J4
Optionally Add-On card with 1x DisplayPort
LVDS Optionally Add-On card (TBD)
Audio 3x Audiojacks stack J40 (in REAR-IO area)
Jack Blue Line-In
Green Speaker
Pink Mic
Audio Audio Pin header J41
Line-out
Line-in
Surround output: SIDE, LFE, CEN, BACK and FRONT
Microphone: MIC1
SPDIF-OUT (electrical Interface only)
LAN Two RJ45 connectors J8 (in REAR-IO area)

2x 10/100/1000Mbits/s LAN (ETH1/ETH2) using Intel®
Pearsonville xGB PCI Express Ethernet controller
(WGI211ATSLJXZ).

PXE Netboot supported.

Wake On LAN (WOL) supported
USB 14x USB ports (9x USB2.0 & 4x USB2.0/USB3.0):
area)
area)
Serial 2x RS232 pin header (+12V, -12V supply generated by driver
port circuit)
COM1 2x 5 Pin row J23
COM2 2x 5 Pin row J22
LPC LPC connector J29
Page 10
2x USB2.0 in Frontpanel Connector J5
2x USB2.0 in USB Internal USB Connector J16
4x USB2.0, USB stack J20 (in REAR-IO area)
2x USB 2.0/USB3.0, Right USB stack J14 ( in REAR-IO
2x USB 2.0/USB3.0, left USB stack J15
1x USB 2.0 in mPCIe socket J38
1x USB 2.0 in mSATA/mPCIe socket J43
KTA75/Flex Users Guide
KTA75/Flex Users Guide
System Specifications
(in REAR-IO