Table of Contents
Advertisement
KTD-N0876-0
7.2 DC Power Internal Connector (J19)
The KTA75/Flex has an internal power input connector for supplying
voltage in the range from +11.4V to +12.6V. The power connector is a 4
pin 12V ATX connector type Lotes ABA-POW-003-K02 or similar.
Header
Warning: Hot Plugging power supply is not supported. Hot plugging
might damage the board.
Note 1: Use of the 4-pin ATX+12V Power Connector is required for
operation of all KTQ67 board versions.
Notes:
To protect the external power lines of peripheral devices make sure that
maximum available current.
protecting conditions of IEC/EN 60950.
Alternatively the DC Power External Connector can be used
Page 30
Pin
Signal
1
GND
2
GND
3
12V
4
12V
- the wires have the right diameter to withstand the
- to enclosure of the peripheral device fulfills the fire-
KTA75/Flex Users Guide
KTA75/Flex Users Guide
Connector Signal Definition
Description
Ground
Ground
Power supply
+12V
Power supply
+12V
Advertisement
Table of Contents
