Overview Screen - USC LPX300 Operator's Manual

1
2
1. SEED WHEEL STATUS BOX:
top of the box, as well as the current RPM of the seed wheel, target flow rate and the
calculated flow rate. The totalizer displays the amount of material used. Run time
displays the amount of elapsed time since the current run was started and the
calibration ratio for the product being used. The Seed Wheel motor status indicator
displays On or OFF.
2. DRUM & ATOMIZER STATUS BOX:
and Atomizer motors as well as the percent of maximum speed they are running at.
3. AUXILIARY STATUS BOX:
this displays the current motor status and what H-O-A mode of operation the auxiliary
device is in .
4. CONVEYOR STATUS BOX:
conveyors as well as the active or inactive state of the proximity sensors.
Page 46
LPX SEED TREATER

OVERVIEW SCREEN

Displays the name of the active product at the
Displays the ON or OFF status of the drum
If an auxiliary device is connected to the treater,
Displays the motor status of the inlet and outlet
3
4