8. MEASURE BY:
measurement options.
9. SAVE:
Saves any changes to the chemical profile.
10. CALIBRATION FACTOR:
Calibration Calculator. Pressing this button brings up a numeric keyboard allowing
the operator to manually enter a value.
1
2
3
4
1. ACTUAL WEIGHT:
the actual weight applied during the calibration procedure (see page 52).
2. TOTALIZER WEIGHT:
number from the Totalizer display below it.
3. TOTALIZER:
This display indicates the amount of product the program estimates
it weighed on the last run.
4. APPLY:
After the actual weight and target weight have been entered, the
calculated ratio will be updated. Pressing this button returns the operator to the
product editing screen and updates the calibration ratio.
5. SCREEN EXIT:
screen.
6. SELECTED RECIPE:
calibration.
Page 44
LPX SEED TREATER
PRODUCT EDITING SCREEN
Pressing this button toggles between the SCU and CWT
This button displays the calibration ratio from the
CALIBRATION CALCULATOR SCREEN
Pressing this button brings up a numeric keypad used to enter
Pressing this button brings up a keypad to enter the
Pressing this button returns the operator to the product editing
This display indicates the name of the product for this
5
6
7
8
9