Overview Screen - USC Seed Wheel Operator's Manual

1
2
3
1. PRODUCT NAME:
2. SEED WHEEL MOTOR INDICATOR:
If it is OFF, it will be red. If it is ON, it will be green.
3. OPERATIONAL PARAMETERS:
target flow rate and the calculated flow rate. The totalizer displays the amount of
material used. Run time displays the amount of elapsed time since the current run
was started and the calibration ratio for the product being used.
4. PUMP PROX INDICATOR:
Wheel. When it is green the sensor detects seed, when red it does not.
Page 30
Seed Wheel

OVERVIEW SCREEN

Displays the name of the active product.
Displays the current motor status.
Displays the current RPM of the seed wheel,
Displays the state of the proximity sensor in the Seed
4