System Overview - USC SEED 16 Series Operator's Manual

Seed Inlet
Tow Hitch

Electric Drive: Have a licensed electrician provide power to the motor per the
National Electrical Code ANSI/NFPA 70 and local codes. Install an ON, OFF
switch for the convenience of the operator.

Manual Winch: A winch is located on the transport frame and is used to raise and
lower the conveyor. Turn the handle clockwise to raise and counterclockwise to
lower.
Maintain at least 3 wraps of cable on the drum at the maximum
reach. The drum cable clamp is not designed to hold load.
Seed Series 16 & 20 Conveyor

SYSTEM OVERVIEW

Access
Door
CONTROLS
Electric
Motor
Conveyor
Crank
Page 23