Fire Protection Signal Input (Fire Protection Input (Nc)) (Version 1.1 / 1.2); Fire Protection Signal Input (Version S300) - Salda SMARTY XP Mounting And Installation Instruction

T1:1 (X8 analog input) from T1:3 (B1). This sensor then is called TP, see the piping and instrumentation diagram. Additionally, temperature sensor
8.2.

FIRE PROTECTION SIGNAL INPUT (FIRE PROTECTION INPUT (NC)) (VERSION 1.1 / 1.2)

Automation controller A zone X4
More information can be found in the MCB miniMCB Technical Manual.
8.3.

FIRE PROTECTION SIGNAL INPUT (VERSION S300)

SMARTY v2023.1
Figure 8.1.3.2.1. Signals for electrical preheater
Figure 8.1.3.2.2. Temperature sensors when preheater is used
Figure 8.3.1. Connection of smoke detector
EN | 37