Mounting - Salda SMARTY XP Mounting And Installation Instruction

Figure 5.4.6. SMARTY XV S300 (* Only heater or preheater can be
connected at a time; ** Components connection only with PE1;
*** Components connection only without PE1)
THE LIST OF COMPONENTS
C Plate heat exchanger
IF
IV Exhaust fan
TE Exhaust air temperature sensor
DTJ Extract air temperature and humidity sensor*
RH Air humidity sensor*
KE1 Electric heater
M1 By-pass damper
M3 Exhaust air damper actuator
SK2 Exhaust air pressure sensor*
Ventilated premises
NET
TP Air temperature after preheating coil sensor*
T Temperature sensor*
* Component/possibility to connect it depends on model.
POSSIBLE PCB INPUTS/OUTPUTS
FA Fire alarm
H1 Operation/Working indication output
5.5.

MOUNTING

•
• When connecting air ducts, consider the labels on the casing of the unit.
• Before connecting to the air duct system, the connection openings of ventilation unit should be closed.
•
16 | EN
PV Supply air fan
PF
TA Extract air temperature sensor
TJ Supply air temperature sensor
CO CO sensor*
2 2
PC Computer*
PE1 Electric pre-heater
M2 Outdoor air damper actuator
SK1 Supply air pressure sensor*
TL Outdoor air temperature sensor
MB-Gateway
Stouch, ST-SA-Control, POS8.4420 or POS8.4440
RC
remote control panel*
AQ Air quality sensor*
FPP Fireplace protection
H2 Alarm indication output
SMARTY v2023.1