Operation Indication Output (Version S300); Alarm Indication Output (Version S300); Fire Place Protection (Version 1.1) - Salda SMARTY XP Mounting And Installation Instruction

8.12. OPERATION INDICATION OUTPUT (VERSION S300)

If indication about the status of the air handling unit is needed, it can be connected to dedicated Q24 signal on T7:1. When AHU is ON, indication
WARNING: High voltage on output.

8.13. ALARM INDICATION OUTPUT (VERSION S300)

on T19:1.
WARNING: High voltage on output.
NOTE: lower than 0,05A loads can operate incorrectly.

8.14. FIRE PLACE PROTECTION (VERSION 1.1)

Wiring diagram.
Automation controller C zone, X23 connector.
SMARTY v2023.1
Figure 8.11.1. D2 digital input connection
Figure 8.12.1. Operation indication output connection
Figure 8.13.1. Alarm indication output connection
"ACCESSORIES SETUP (VERSION S300)".
"ACCESSORIES SETUP (VERSION S300)".
EN | 41