Fig.19
Parameters, counters, signals
A
11:20
...
.....
.... ......
: .... ...... ....
............
................
..... ... ....... .... .. ..... ....
B
....... .... .. ..... ....
....... ...........
..... ... ....... ....
..... ... ....... ....
........ .......
4.6.3
Viewing production and software information
Fig.20
Version information
A
11:20
...
.....
.... ......
: .... ...... ....
............
................
..... ... ....... .... .. ..... ....
B
....... .... .. ..... ....
....... ...........
..... ... ....... ....
..... ... ....... ....
........ .......
4.6.4
Manual deaeration
7837115 - v.01 - 10012023
..............
.........
.......
...
......
.....
.....
AD-3000936-02
You can read details about the production dates, hardware and software
versions of the appliance and all connected devices.
..............
.........
.......
...
......
.....
.....
AD-3000936-02
You can manually deaerate your appliance.
2. Select Installation Setup.
Enable installer access if Installation Setup is not available.
2.1. Select Enable installer access.
2.2. Use code 0012.
3. Select the zone or device you want to read out.
4. Select Parameters, counters, signals.
5. Select Counters or Signals to read out a counter or signal.
A
Parameters
Counters
Signals
B List of settings or values
> Version Information
Use the rotary knob to navigate.
Use the
button to confirm your selection.
1. Press the
button.
2. Select Version Information.
3. Select the appliance, control board or any other device you want to
view.
A Select the appliance, control board or device
B List of information
4. Select the information you want to view.
> Commissioning Menu > Deaeration program
Use the rotary knob to navigate.
Use the
button to confirm your selection.
1. Press the
button.
2. Select Commissioning Menu.
3. Select Deaeration program.
The manual de-aeration menu opens.
4. Follow the instructions on the display.
You can press and hold
4 Installer instructions
to abort the procedure.
17