Viewing Production And Software Information; Manual Deaeration; Resetting Or Restoring Settings; Resetting The Configuration Numbers Cn1 And Cn2 - REMEHA Gas 320 Ace Service Manual

4 Installer instructions
Fig.21 Parameters, counters, signals
A
11:20 ... ..... .... ...... : .... ...... ....
............ ................
..... ... ....... .... .. ..... ....
B
....... .... .. ..... ....
....... ...........
..... ... ....... ....
..... ... ....... ....
........ .......
4.6.3

Viewing production and software information

Fig.22 Version information
A
11:20 ... ..... .... ...... : .... ...... ....
............ ................
..... ... ....... .... .. ..... ....
B
....... .... .. ..... ....
....... ...........
..... ... ....... ....
..... ... ....... ....
........ .......
4.6.4

Manual deaeration

4.7

Resetting or restoring settings

4.7.1

Resetting the configuration numbers CN1 and CN2

18
..............
.........
.......
...
......
.....
.....
AD-3000936-02
You can read details about the production dates, hardware and software
versions of the appliance and all connected devices.
..............
.........
.......
...
......
.....
.....
AD-3000936-02
You can manually deaerate your appliance.
The configuration numbers must be reset when indicated by an error
message or when the control unit has been replaced. The configuration
numbers can be found on the data plate of the appliance.
5. Select Counters or Signals to read out a counter or signal.
A Parameters
Counters
Signals
B List of settings or values
> Version Information
Use the rotary knob to navigate.
Use the button to confirm your selection.
1. Press the button.
2. Select Version Information.
3. Select the appliance, control board or any other device you want to
view.
A Select the appliance, control board or device
B List of information
4. Select the information you want to view.
> Commissioning Menu > Deaeration program
Use the rotary knob to navigate.
Use the button to confirm your selection.
1. Press the button.
2. Select Commissioning Menu.
3. Select Deaeration program.
The manual de-aeration menu opens.
4. Follow the instructions on the display.
You can press and hold to abort the procedure.
7734325 - v.07 - 22092022