Renault Duster 2007 Manual page 1135

UCH
Vdiag No.: 09
SC003
This command is used to recover a code which will allow the Techline to supply the After-Sales code.
Recovery procedure for Reserve code:
– Establish dialogue with the UCH.
– Select the menu Repair mode.
– Select the menu Programming.
– Select the line SC003 Spare.
Follow the instructions on the Clip diagnostic tool.
AFTER REPAIR
UCH_V09_SC003
MR-453-X79-82D000$150.mif
V1
ACCESS – SAFETY
Fault finding – Interpretation of commands
SPARE
Equipment required
CLIP
Carry out another fault finding check on the system.
Deal with any other faults.
Clear the stored faults.
82D-35
82D