Headlight Beam Adjustment - Renault CLIO 2019 Vehicle User Manual

hEaDlighT bEam aDJUsTmEnT

a
Switch A is used to adjust the height of
the headlight beams according to the
load.
With the dipped beam headlights lit,
press or lift switch A as many times
as is necessary to select the required
position on the instrument panel. The
position selected is displayed on the
instrument panel for approximately
30 seconds.
note: depending on the vehicle, at
each engine start-up the selected po-
sition may be displayed on the instru-
ment panel for approximately 30 sec-
onds.
1.104
Driver alone or with front passenger
all seats occupied
Driver with passengers and luggage
(or load) reaching the maximum
permissible all-up weight
Driver without passengers and luggage
(or load) reaching the maximum
permissible all-up weight
The table below gives some examples. In all cases, adjust control A accord-
ing to the vehicle load so that the road can be seen and other drivers are not
dazzled.
Examples of positions for
adjusting
control A according to the load
0
2
3
4