Communication Connection Steps - WESTECH Solax X3-HYBRID G4 Manual

Electrical Connection

5.5.5 Communication Connection Steps

Step 1. Prepare a communication cable, and then find the communication
adapter in the accessory bag.
Communication cable Waterproof connector with
Step 2 . The inverter CAN/DRM/SHUT port communication line connection,
need to remove the inverter cover plate.
Torque screwdriver
( Torque: 1.2±0.1N·m)
com
CAN
Upgrade/Dongle
Step 3. Insert the communication cable through the communication
adapter, and peel off the outer insulation layer of 15 mm.
Meter/CT/BMS/COM
62
RJ 45 RJ 45 terminal
Grid
CAN LCD DRM
EPS(Off-grid)
Diagonal pliers
Diagonal pliers
CAN
CAN
DRM
Shut down
Step 4. Insert the prepared communication cables into the RJ45 terminals
in sequence, and then use network cable crimping pliers to
press them tightly.
Multifunction terminal
crimping tool (RJ45)
1 2 3 4 5 6 7 8
Electrical Connection
1) White with orange stripes
2) Orange
3) White with green stripes
4) Blue
5) White with blue stripes
6) Green
7) White with brown stripes
8) Brown
63