Decommissioning; Disassemble The Inverter; Storage And Transportation; Waste Disposal - WESTECH Solax X3-HYBRID G4 Manual

Decommissioning

9 Decommissioning

9.1 Disassemble the Inverter

Remove DC input line and AC output line of inverter.
Wait for at least 5 minutes to power off.
Remove all cable connections from the inverter.
Remove inverter from finger support the bracket.
Remove the bracket if necessary.
9.2 Packing
Load the inverter into the original package if possible.
If the original package can not be found, you can also use the
following requirements of the carton packaging:
Bearing capacity of more than 30 kg.
Easy to carry.
Can completely seal the cover.

9.3 Storage and Transportation

Store the inverter in a dry, temperature -40°C~70°C environment. Pay
attention to less than four machines on each stack board during
storage and transportation.

9.4 Waste Disposal

If it is necessary to scrap the inverter or other related parts, be sure to
send the waste inverter and packaging materials to the designated
location for recycling by the relevant department.
118

10 Disclaimer

The X3-Hybrid G4 series hybrid inverters are transported, used and
operated under limited condition, such as environmental, electrical etc.
SolaX shall not be liable to provide the service, technical support or
compensation under conditions listed below, including but not limited
to
:
Inverter is damaged or broken by force majeure (such as earthquake,
flooding, thunderstorm, lighting, fire hazard, volcanic eruption etc).
Inverter's warranty is expired and doesn't buy extended warranty.
Can't provide the inverter's SN, warranty card or invoice.
Inverter is damaged by man-made cause.
Inverter is used or operated
against any items in local policy.
Inverter's installation, configuration, commissioning doesn't follow the
requirements mentioned in this manual.
Inverter is installed, refitted or operated in improper ways mentioned
in this manual without authority from SolaX.
Inverter is installed, operated under improper environment or
electrical condition mentioned in this manual without authority from
SolaX.
Inverter is changed, updated or disassembled on hardware or
software without authority from SolaX.
Obtain the communication protocol from other illegal channels.
Build monitoring, control system without authority from SolaX.
Connect to other brands batteries without authority from SolaX.
SolaX will keep right to explain all the contents in this user manual.
Disclaimer
119