Electrical Connections; Pv Connection - WESTECH Solax X3-HYBRID G4 Manual

Table of Contents

Advertisement

Electrical Connections

5 Electrical Connections

5.1 PV Connection

X3-Hybrid G4 series inverter have two PV inputs. Please select
photovoltaic modules with good performance and quality assurance.
The open circuit voltage of the module array should be less than the
maximum PV input voltage specified by the inverter, and the working
voltage should be within the MPPT voltage range.
Table 1: Maximum input voltage limit
X3-Hybrid-5.0-D
X3-Hybrid-6.0-D
Model
X3-Hybrid-5.0-M
X3-Hybrid-6.0-M
Max. DC input voltage
Warning!
The voltage of photovoltaic modules is very high, and is
dangerous voltage. When wiring, please follow the safe
electricity regulations.
Note!
Please do not make PV positive or negative ground!
Note!
The following PV module requirements need to be applied to
each input range:
1. Same model
2. Same quantity
3. The same queue
4. The same angle
Note!
x
X3-Hybrid G4 series inverters do not support the following PV
module connection modes.
PV
X3-Hybrid G4 series inverter support the following PV module
connection modes.
PV
32
X3-Hybrid-8.0-D
X3-Hybrid-10.0-D
X3-Hybrid-12.0-D
X3-Hybrid-15.0-D
X3-Hybrid-10.0-M
X3-Hybrid-15.0-M
X3-Hybrid-8.0-M
X3-Hybrid-12.0-M
1000V
+
+
+
PV1
-
-
+
+
PV2
-
-
-
Inverter
+
+
+ -
PV1
-
+
+ -
PV2
-
Inverter
Ø
Connection step
The PV port wiring of X3-Hybrid G4 M series inverter has been
completed. For speci c installation details, please refer to the X3-
Matebox Quick Installation Guide, the D series needs to be wired
according to the following steps.
Step 1. Turn off the DC switch, connect the PV module, prepare a 12AWG
PV cable, and find the PV (+) terminal and PV (-) terminal in the package.
Positive PV pin
Negative PV pin
PV pin
PV cable
Step 2. Use a wire stripper to strip the 7mm insulation layer of the wire end.
Wire stripper
Step 3. Tighten the cable with the insulation layer stripped and insert it into
the metal terminal (see Figure 1), make sure all wires are inserted Into the
metal terminal (see Figure 2).
Positive PV pin
Negative PV pin
Figure 1
Positive metal terminal
Electrical Connections
Positive terminal
Negative terminal
Negative metal terminal
Figure 2
33

Advertisement

Table of Contents
loading

Table of Contents