WESTECH Solax X3-HYBRID G4 Manual page 5

Safety
Danger!
Danger to life due to high voltages in the inverter!
The personnel responsible for the installation, electrical
connection, debugging, maintenance and fault handling
operation of this product need to be trained, master the correct
operation method, have the corresponding electrician
qualification and safety operation knowledge.
Caution!
When the inverter is working, it is strictly forbidden to touch the
shell. The temperature of the shell is high and there is a risk of
scalding.
Caution!
Radiation may be harmful to health!
Do not stay for a long time and keep at least 20 cm away from
the inverter.
Note!
Ground PV system.
Finish PV modules and photovoltaic system grounding in
accordance with local requirements to achieve optimal
protection of systems and personnel.
Warning!
Ensure that the input DC voltage is below the inverter limit.
Excessive DC voltage and current may cause permanent
damage or other losses to the inverter, which is not covered by
the warranty.
Warning!
Before performing maintenance, cleaning or operation on the
circuit connected to the inverter, authorized maintenance
personnel must first disconnect the AC and DC power supplies
of the inverter.
04
Warning!
The inverter can not be operated when it is running.
Warning!
Risk of electric shock!
Strictly follow relevant safety specifications for product installation
and testing. During installation, operation or maintenance, please
read carefully and follow the instructions and precautions on the
inverter or user manual. If the operation is incorrect, it may cause
personal and property losses. Please keep the user manual properly
after use.
This inverter can only use the accessories sold and recommended by
SolaX, otherwise it may cause fire, electric shock or casualties.
Without the authorization of our company, you may not open the
inverter cover or replace the inverter parts, otherwise the warranty
promise of the inverter will be invalid.
The use and operation of the inverter must be carried out in
accordance with the instructions in this manual, otherwise this
protection will fail and the warranty of the inverter will also fail.
During working, the inverter surface temperature may exceed 60
please make sure the inverter cools down before touching, and
make sure children can not touch.
When exposed to sunlight, photovoltaic arrays generate dangerous
high DC voltages. Please follow our instructions, otherwise it will be
life-threatening.
All DC and AC power sources must be disconnected from the
inverter for at least 5 minutes before any wiring or electrical
operation is performed on the inverter to ensure complete isolation
of the inverter and avoid electric shock.
Safety
°C ,
05