Page 2
Quick Installation Guide Accessories. Object Description AC End Cable (Male), 2m 12AWG Cable DC Extension Cable, 1m M8*25 screws AC Female End Cap, IP68 *Note: All accessories listed above are not included in the package, and need to be purchased separately. Please contact our sales representative for pricing information.
Installation Steps Note:Make sure that the micro inverter is installed in the required environment (see the Product User Manual for more details). Step 1. Attach Microinverter on Rail. a). Mark the approximate center of each panel on the frame. b). Fix the screw on the rail. c).
Step 3. Connect AC End Cable A) Installation of cable end connector. Solid wrench No.30 or monkey wrench wide than 3cm 、 Cross screwdriver No.1、Wire striper. a). Disassemble the connector and thread the cable through the waterproof cap and connector housing b).Connect the cable to the terminal, and the screw torque is 0.8 + / - 0.1N ·...
Step 4. Create an Installation Map A) Affix the serial number label to the respective location on the installation map. Microinverter Installation Map V1.0 Please Make N for Panel Type: Customer Information: DCU Serial Number: North Azimuth: Tilt: Sheet...
Step 5. Connect PV Modules A) Mount the PV modules above the microinverter. B) Connect the PV modules’ DC cables to the DC input side of the microinverter. Step 6. Energize the System A) Turn on the AC breaker of the branch circuit. B) Turn on the main AC breaker of the house.