WESTECH Solax X3-HYBRID G4 Manual page 25

Electrical Connection
Step 4. Find the location of the AC interface on the inverter, insert the
crimped terminals into the UW10 terminals L1, L2,L3,N, and PE according
to the wire sequence, and use a flat-blade screwdriver to tighten the
screws. (Torque: 1.5±0.1N m)
·
Step 5. Install the AC waterproof cover, and tighten the screws on the four
sides of the waterproof cover with an
44
Torque screwdriver
( Torque: 1.5±0.1N·m)
Hexagon keys .
Hexagon keys
( Torque: 0.8±0.1N·m)
Step 6. Tighten the waterproof fastening head.
Electrical Connection
45