Advertisement
Installation Steps
Note：Make sure that the micro inverter is installed in the required environment (see the Product User Manual for more
details).
Step 1. Attach Microinverter on Rail.
a). Mark the approximate center of each panel on
the frame.
b). Fix the screw on the rail.
c). Hang the microinverter on the screw (as shown in
the picture below), and tighten the screw. The balck
cover side of the microinverter should be facing the
panel.
Step 2. Connect AC Cables of Microinverter
a). Plug the AC connector of the first microinverter
into the connector of the second microinverter
to form a continuous AC branch circuit.
b). Install the AC end cap on the AC connector of
the last micro inverter in the AC branch circuit
c). *Note: The length of AC cable on microinverter
is roughly 2 m, if the distance between two
microinverters is more than 2m, please use an
AC extension cable between two microinverters
(As shown in the picture below).
2
Advertisement
