WESTECH Solax X3-HYBRID G4 Manual page 60

Troubleshooting
Number
Manager EEEPROM Fault.
. • Shut down photovoltaic ,battery and grid ,reconnect.
IE 103 Mgr EEPROM Fault
• Or seek help from the installer if it can not return to normal.
DSP version error.
DSPunmatched
IE 104
• Check that the DSP1 version matches
• Or seek help from the installer if it can not return to normal.
NTC invalid
• Make sure the NTC is properly connected and the NTC is in good
IE 105 NTC Sample Invalid condition.
• Please confirm that the installation environment is normal
• Or ask for help from the installer, if it
can
not
return
to normal.
Battery
temp
low
• Check the battery installation environment to ensure good heat
Bat Temp Low
IE 106
dissipation.
• Or ask for help from the installer, if it
can
not
return
to normal.
Battery
temp
high
Check the battery installation environment to ensure good heat
•
Bat Temp High
IE 107
dissipation.
• Or ask for help from the installer, if it
can
not
return
to normal.
Meter error
IE 109 Meter Fault • Please check that the instrument is working properly
• Or seek help from the installer if it can not return to normal.
Bypass relay fault
BypassRaleyFault
IE 110 • Press the ESC" key to restart the inverter.
• Or ask for help from the installer if it
can
not
return
to
normal.
Battery Error - External Communication Fault
BE 001 BMS_External_Err
• Please contact the battery supplier.
Battery Error - Internal Communication Fault
BMS_Internal_Err
BE 002
• Please contact the battery supplier.
Over voltage in battery system
BE 003 BMS_OverVoltage
• Please contact the battery supplier.
Low voltage in battery system
BMS_LowerVoltage
BE 004
• Please contact the battery supplier.
Battery fault - over charge fault
BMS_ChargeOCP
BE 005
• Please contact the battery supplier.
Battery fault-discharge over current fault
BMS_DischargeOCP
BE 006
• Please contact the battery supplier.
Over temperature in battery system
BE 007 BMS_TemHigh
• Please contact the battery supplier.
Battery temperature sensor malfunction
BMS_TempSensor Fault
BE 008
• Please contact the battery supplier.
114
.
Number
Battery Unbalanced Failure
BMS_CellImblance
BE 009
• Please contact the battery supplier.
Battery hardware protection failure
BE 010 BMS_Hardware Protect
Please contact the battery supplier.
•
Battery circuit failure
BE 011 BMS_Circuit_Fault • Restart the battery
• Please contact the battery supplier.
Battery insulation
BMS_ISO_Fault
BE 012 • Check that the battery is properly grounded and restart the battery.
Please contact the battery supplier.
•
Battery voltage sensor fault
BE 013 BMS_VolSen_Fault
• Please contact the battery supplier.
Temperature sensor failure
BMS_TemppSen_Fault • Restart the battery .
BE 014
• Please contact the battery supplier.
Battery current sensor fault
BMS_CurSensor Fault
BE 015
• Please contact the battery supplier.
Battery relay failure
BMS_Relay Fault
BE 016
Please contact the battery supplier.
•
Battery type failure
BMS_Type_Unmatch
BE 017 • Upgrade the battery BMS software.
• Please contact the battery supplier.
Battery version mismatch failure
BE 018 BMS_Ver_ Unmatch • Upgrade the battery BMS software.
• Please contact the battery supplier.
Battery
manufacturer did not match the fault
BMS_MFR_ Unmatch • Upgrade the battery BMS software.
BE 019
• Please contact the battery supplier.
Battery hardware and software mismatch failure
BMS_SW_ Unmatch
BE 020 • Upgrade the battery BMS software.
Please contact the battery supplier.
•
Battery master slave control mismatches
BE 021 BMS_M&S_ Unmatch • Upgrade the battery BMS software.
• Please contact the battery supplier.
Battery charging request does not respond to a fault
BMS_CR_ NORespond • Upgrade the battery BMS software.
BE 022
• Please contact the battery supplier.
Battery slave software protection failure
BE 023 BMS_SW_ Protect • Upgrade the battery BMS software.
• Please contact the battery supplier.
Battery fault-discharge over current fault
BE 024 BMS_536_Fault
• Please contact the battery supplier.
Over temperature in battery system
BE 025 BMS_SelfcheckErr
• Please contact the battery supplier.
Troubleshooting
.
failure
115