Brake Handle Extensions - Physipro SPIRAL Owner's Manual

Owners manual

4.22 Brake handle extensions :

Extensions of telescopic and fixed brake handles can be installed on the Spiral tilt in space
wheelchair to facilitate the use of the brakes.
Installing the brake handle extension:
Remove, if necessary, the trim (H) installed on the brake lever (A);
1.
Insert the body of the telescopic extension (B) or the fixed extension (G) on the brake
2.
lever (A);
Screw the bolt (C) into the hole (A-5) of the brake lever (A) to constrain the telescopic
3.
extension (B);
Adjust the height of the brake handle extension (B) by screwing the bolt (D) into one of
4.
the holes (A-1, A-2, A-3 ou A-4);
Close the end of the extension with the plug (E);
5.
Glue the trim (F) to the brake extension;
6.
51
Figure : Installing the brake handle extension
49
49
ENGLISH
Révision 0
juillet 18
Revision 1
July 2018