Angle Adjustable Push Handle - Physipro SPIRAL Owner's Manual

ENGLISH

4.13 Angle adjustable push handle :

The Spiral tilt in space wheelchair can be equipped with an adjustable angle push handle. It can
be installed only on the height-adjustable backrest canes by replacing the cane top. With this
handle the back angle remains adjustable from 85° to 120°.
Installing the angle adjustable push handle:
Adjust the width of the handle to that of the chair;
1.
a. Screw the bolts (A) into the push rod (B);
Adjust the height of the backrest (See section: 4.10);
2.
Attach the tilt lever to the push handle;
3.
a. Screw the bolts (C) into the tilt lever (D);
DO NOT LIFT THE WHEELCHAIR USING THE PUSH HANDLE
39
Figure : Installing the angle adjustable push handle
38
38
Spiral
Révision 0
juillet 18