Adjusting The Push Handle - Physipro SPIRAL Owner's Manual

Owners manual

3.12 Adjusting the push handle :

The position of the push handle can be adjusted at an angle by using a push-button ball joint.
This mechanism allows adjustment in increments of 15°.
Adjusting the angle of the push handle:
1. Press the 2 buttons on the angle adjustment joints simultaneously and hold down;
2. Rotate the push handle to the desired position;
3. Release the push buttons;
19
Figure : Adjusting the push handle
21
21
ENGLISH
Révision 0
juillet 18
Revision 1
July 2018