Owners manual
4.8 Retractable forks :
Assembling the mechanism of retractable forks:
1. Insert the ball bearings (B) and bearing cap (C) into the frame housing (D) as needed;
2. Press shoulder rings (J) into parts (D), (F) and (I);
3. Connect the parts (D), (F) and (I) using the pins (E);
4. Secure the frame tube (D) to the bracket (H) with a pin (G);
5. Connect the part (F) to the support (H) with a pin (G) while carefully integrating the spring
(K) and its sleeve (L);
6. Installing a standard fork on the retractable forks mechanism (See section: 4.7);
7. Install the cap (A) onto the frame housing;
32
Figure
: Assembling the mechanism of retractable forks
31
31
ENGLISH
Révision 0
juillet 18
Revision 1
July 2018